Skip nav to main content.

610-D/10° Main Beam, Uni-Directional Antenna

610-D/10° Main Beam, Uni-Directional Antenna

Part Number: 610300-101

dBs 610-D/10° Main Beam

The dBs 610-D/10° is a 4 element, extended aperture, high performance, full service, all band, uni-directional, Automatic Dependent Surveillance-Broadcast (ADS-B) antenna.

This uni-directional antenna has 4 active elements and other components, which produce high main lobe and horizon gain with wide beam width. The main lobe of the vertical pattern has been squinted to 10° above the horizon for improved multipath performance.

This antenna provides vertically polarized, uni-directional coverage with the main beam of radiation up tilted to minimize the effects of ground reflections. The array has two integral monitor probes which constantly sample the RF signal delivered to the antenna.

The antenna is lightweight, small, and 100% metal tubular construction making it extremely rugged and lightning rod compatible. Optional pipe adapter permits attachment of the antenna to a 4″ O.D. pipe and optional plate adapter.

The main RF input connector uses a Type N jack.

It is interoperable with lightning rod assembly and/or dual obstruction lights.

The model dBs 610-D/10° ADS-B antenna has been designed for ruggedness, lightweight, minimum size, long life, and in accordance with FAA-E-2754 and FAA-G-2100. It also exceeds the requirements of the UK CAA specification.

dBs 610-D/10° with Marine Option: The dBs 610-D Marine Version antenna is an optional upgrade as well. The RF transmission assembly is completely sealed and weatherproofed to protect in harsh environments such as salt water, extreme humidity, wind, sand, snow, and ice. Contact our factory for more details.

dB Systems Inc. offers ADS-B/MLAT repair and ADS-B/MLAT refurbishment at our facility. Contact us for a quotation.

 

Net Dimensions and Weight: 36” long, 3 1/4” O.D. radome, has top cap and base collar; 21 lbs.

Gross Dimensions and Weight: 41″ x 8″ x 8″; 28 lbs.

 

Inches is denoted by (“)

Outside Diameter is denoted by (O.D)

Pounds is denoted by (lbs)