Control Cable, Antenna to Antenna Control Unit
Part Number: 901702-4XX
This interface cable carries information between the Antenna and the Antenna Control Unit (ACU). Signals on this cable include the I2C data stream, 9720 Hz clock, 15 Hz timing, command lines, and analog forward and reverse bias.
The nominal cable length of this cable is 50 feet. This cable is available in various lengths. The last two digits of the part number specify the length. The following table can be used to determine the part number for the length required.
Weight of cable varies by length, ~0.183 lbs. per foot
Part Number | Length (Ft.) | Part Number | Length (Ft.) | Part Number | Length (Ft.) | Part Number | Length (Ft.) |
---|---|---|---|---|---|---|---|
901702-401 | 50 | 901702-407 | 80 | 901702-413 | 120 | 901702-419 | 180 |
901702-402 | 55 | 901702-408 | 85 | 901702-414 | 130 | 901702-420 | 190 |
901702-403 | 60 | 901702-409 | 90 | 901702-415 | 140 | 901702-421 | 200 |
901702-404 | 65 | 901702-410 | 95 | 901702-416 | 150 | 901702-422 | 210 |
901702-405 | 70 | 901702-411 | 100 | 901702-417 | 160 | 901702-423 | 220 |
901702-406 | 75 | 901702-412 | 110 | 901702-418 | 170 | 901702-424 | 230 |