Skip nav to main content.

Antennas

300A Glide Slope Antenna

Directional

Glide Slope

Part Number: 300300-100

 

dBs 300A

The dBs 300A is a premium performance Glide Slope (Path) antenna built by dB Systems Inc., a worldwide leader in aircraft navigation antennas. Engineered and built on the legacy of all dBs products, this antenna delivers consistent, phase stable RF signal in the world’s most severe locations, such as Cold Bay, Alaska. FAA approved, and certified for use in all Instrument Landing Systems (ILS), each antenna is phase matched and tested to meet the current FAA standards for low ceiling and limited visibility landings. It is the only glide slope antenna with a removable dipole channel assembly. This feature minimizes the need for adjustment following antenna replacement, as the corner reflector assembly can remain in place on the tower while the channel assembly is removed and replaced. When used with the appropriate transmitter system, the dBs 300A antenna transmits specially formed radio frequency (RF) beams in the frequency range of 328 to 336 MHz. Aircraft equipped with the proper airborne receiving equipment can follow the glide slope signal, provided by the dBs 300A, and can lock on and follow appropriate descent angle safely down to the runway.

The glide slope antenna assembly consists of three collinear dipoles mounted in front of a 90-degree corner reflector, which form the shaped horizontal and vertical patterns of the antenna.

The assembly includes a temperature stabilized RF Distribution System, individual antenna element integral monitors, and a monitor combining device which provides a single monitor output. The entire RF Distribution System, as well as the integral monitor, are constructed using phase stable, semi-rigid coaxial cable which provides less sensitivity to environmental changes.

The RF input (J1) and the monitor output (J2) connectors are both Type N female receptacles.

Glide Slope Support Bracket (P/N 300500-100)

Optional Position Adjusting Mounting Bracket: Allows ~18 inches of continuous adjustment of the antenna’s physical position in the vertical and horizontal axis.